|
 ISDN/Q.931/Q.921/DSS1 Source
Code
Both Basic Rate ISDN (BRI ISDN) and Primary Rate ISDN (PRI ISDN) software source code stacks are among the telecom and datacom protocol stacks that TeleSoft International licenses to developers. Customers can license Q.921 LAPD or Q.931 LAPB individually or as an integrated ISDN software stack.
TeleSoft licenses well-proven source code for AutoSPID, Autoswitch Detection, NFAS, and D-Channel Backup in addition to DSS1 and other switch variants used worldwide. Manufacturers license TsLink3
ISDN/Q.931/Q.921/DSS1 and other TsLink3 conformance-proven source code stacks to accelerate the development and conformance testing of in-band signaling products.
TsLink3 signaling protocol source code is architected for applications, both embedded and host-based, in which performance and code size are important.
For:
- Base stations
- Customer Premise Equipment
- Intelligent networks
- Signaling transfer points
- Switches
- Telephony
- Test Equipment
"The TeleSoft code gave us a fast way to add ISDN capabilities to the InstantOffice system. During implementation, technical support responded very quickly with concise answers to our questions. When the rare problem was found at a customer site, technical support was again right there, helping us to quickly solve the problem."
- - Vertical Networks, Sunnyvale CA
Maintainability and scalability are designed into each TsLink3 stack. Comprehensive comments and documentation support you or a colleague as your product goes forward. The value of TsLink3 stacks will be evident in each phase of your engineering schedule and the product life span.
Shorter Learning Curve & Faster Customization
- ITU-T primitives and software structure -> Easy to relate TsLink3 code to other ITU-T based protocols (e.g., E1 CAS, X.25, FR).
- 'C' switch statements that closely correspond to the
ITU-T standard -> Straightforward to read and modify code, and locate the event/state action points in the
ITU-T standard.
- Adherence to ANSI 'C' standards -> full portability.
- OS-independence -> Choice of RTOS, not locked into a single vendor.
- Processor-independence -> Mobility across CPU platforms.
- Simple state machine design -> easy to understand and change code for national-specific variants
Faster Debugging
- Specific defined constants, comment strings and variable naming -> Supports use of text search techniques to quickly locate a specific section of code and determine the side effects of changes that are being considered.
- ITU-T primitives and software structure -> Clear traceable dataflow.
- Development and testing on TsLink3 hardware -> Clean, proven "rock solid" code.
Smaller Code Inventory Required
- Each line can be configured at run-time for a different T1, E1, R2, PRI or BRI varian
- Co-resident T1, E1, R2, ISDN PRI and BRI switch variants, Frame Relay, X.25, PPP, and ML-PPP stacks.
Top
ISDN BRI Features
- Network (NT)- and Terminal (TE)- Side Support
- Worldwide switch coverage
- US National ISDN-1 + Lucent 5ESS + Nortel DMS-100/250 + GTE GTD-5
- US National ISDN-2 with Parameter Download (for use with Supplementary Services)
- Euro ISDN ETSI DSS1 NET3 (TBR3) including deltas for:
- France
- Germany
- UK
- China
- Hong Kong
- Korea
- Singapore
- Japanese NTT INSnet64
- France VNx
- German 1TR6
- Australian TS-013 and TS-031
- AutoSPID selection per Bellcore SR-3888
- Includes Automatic Number Load (ANL)
- Autoswitch Detection per Bellcore SR-3888
- Supplementary Services
- US National ISDN
- Lucent 5ESS Custom
- EuroISDN ETSI Compliant
- Q.931 (see Q.931 section below)
- Q.921 (see Q.921 section below)
ISDN PRI Features
- Network (NT)- and Terminal (TE)- Side Support
- Worldwide switch coverage
- US National ISDN-2 + TR41459 (Lucent 4ESS and 5ESS) + Nortel DMS-100/250 + GTE GTD-5
- Euro ISDN ETSI DSS1 NET5 (TBR4)
- China
- Hong Kong
- Korea
- Singapore
- Japanese NTT INSnetl500
- Australian TS-014 and TS-038
- NFAS (in support of NI-2 + Lucent 41459 + Nortel DMS100 PRI), NT & TE
- D-Channel Backup (in support of NI-2), NT & TE
- Q.931 (see Q.931 section below)
- Q.921 (see Q.921 section below)
Q.931 Features
- Supports BRI and PRI applications
- Network (NT)- and Terminal (TE)- Side Support
- Easy to correlate source code with documentation, due to mapping code structure directly to Q.931 SDLs (Specification Description Language Diagrams).
- Maintain smaller code size when using both NT- and TE-side code, due to reuse of core elements for both network- and terminal-side.
Q.921 Features
- Supports BRI configurations
- point-to-point
- point-to-multipoint
- Supports PRI configuration
- Network (NT)- and Terminal (TE)- Side Support
- Maintain smaller code size, decrease memory requirements, decrease the number of OS tasks required, and decrease the engineering effort required when using two or more LAP protocols (LAPD/LAPB/V.120 Layer 2), due to ability to use a single LAP module to support multiple LAP protocols.
- Increase efficiency of customer's application, due to handling both fixed and automatic TEIs in a single task to decrease the number of overall OS tasks.
- Easy to correlate source code with documentation, due to mapping code structure directly to Q.921 state tables
- LAPB Support
- Supports BRI and PRI applications
- Network (NT)- and Terminal (TE)- Side Support
TeleSoft
TsLink3 Software Compliance Testing
|
Signaling
Modules
|
Compliance Tested by
|
|
US
NI-2 BRI
|
Telcordia/Bellcore
|
|
US
NI-1 BRI
|
Telcordia/Bellcore
|
|
Lucent
5ESS BRI
|
Telcordia/Bellcore
+ AT&T
|
|
Nortel
DMS-100 BRI
|
Northern
Telecom & Telcordia/Bellcore
|
|
ETSI
CTR3 (NET3) BRI
|
PTT
Telecom,CSELT (Italy) & TUV
|
|
UK
ISDN-2 BRI
|
BTL
(UK)
|
|
German
1TR6 BRI
|
FTZ
(Germany)
|
|
French
VN3 BRI
|
CNET
(France)
|
|
Japan
INSnet64 BRI
|
JATE
(Japan) & TUV
|
|
Australia
TS-013 BRI
|
Comtest
(Australia) & TUV
|
|
Australia
TS-031 BRI
|
Comtest
(Australia) & TUV
|
|
Lucent
TR41459 (4ESS+5ESS) PRI
|
Bellcore
|
|
Nortel
DMS-100 PRI
|
Bellcore
|
|
US
NI-2 PRI
|
Bellcore
|
|
ETSI
CTR4 (NET5) PRI
|
TUV
|
|
Japan
INSnet1500 PRI
|
JATE
(Japan) & TUV
|
|
Australia
TS-014 PRI
|
Comtest
(Australia) & TUV
|
|
Australia
TS-038 PRI
|
Comtest
(Australia) & TUV
|
|
Data
+ Signaling
|
Compliance
Tested by
|
|
|
|
|
Always
On/ Dynamic ISDN (AO/DI)
|
CIUG
Pac Bell
|
|
|
|
|
Supplementary
Services
|
Compliance
Tested by
|
|
|
|
|
US
NI-1
|
Bellcore
|
|
EuroISDN
|
Digital
Engineering
|
|
NI-2
Parameter Download
|
Ameritech
|
|
ETSI
QSIG
|
Digital
Engineering
|
|
Lucent
5ESS
|
AT&T
|
Special Features and Upgrade Modules
Universal Application Programming Interface (UAPI)
TsLink3 code includes a rich message-based Universal API (UAPI) which presents a simple interface for simple applications such as "signaling-only." UAPI also provides the versatility and power needed to support more complex configurations which combine signaling with data protocols or with specialized hardware. The TsLink3 Universal API coupled with the straightforward structure of the TsLink3 protocol stack enables you to easily follow the API message flow through the code to determine where to make modifications required for your application.
The majority of simple "signaling-only" applications require a very small subset of the TsLink3 API messages and parameters - and the non-applicable messages can be disregarded and unused parameters set to zero. More complex applications benefit from the large set of messages and parameters that we provide as templates.
UAPI is common across all TeleSoft stacks which decreases the time and effort required to add upgrade modules to an existing TsLink3 stack and to develop with additional TeleSoft stacks.
High Availability (HA)
TsLink3 supports High Availability applications for high density switches with multiple modes of HA operation, including the seven key elements of HA. Please refer to the
TeleSoft HA White Paper
for details. Applications requiring HA will benefit from the TsLink3 stack capacity to support up to 64,000 simultaneous connections and up to 256 ports.
Software Tools
Internal Protocol State Logging Tool and Debugging Tool are invaluable aids during portation and integration, included with every TsLink3 stack at no additional charge.
Purchasing TsLink3 Software
TsLink3 Source Code is supplied in comprehensive, portable packages of 'C'
source code modules and interfaces necessary to develop robust products.
Source Code packages provide source code from Layer
1 device
driver software up through the Layer 3/Layer
4 interface of the OSI model.
Upgrade and Individual Modules
Completing the solution are upgrade- and individual-modules that increase your market opportunity by increasing your products' connectivity capabilities. Modules include PPP, ML-PPP, X.25, AO/DI, Frame Relay, T1
RBS, E1 CAS, R2, V.120, and Supplementary Services.
Technical and Custom Support
12-month maintenance extensions include code updates and quick-response technical support via E-mail, phone and fax.
Expert Consulting and Customization Services
Consult with our experienced engineers early to avoid expensive pitfalls later.
Documentation
Comprehensive documentation customized for your load. Available in a searchable soft format or in hardcopy. All nomenclature complies with
ITU-T.
Price
Cost-effective one-time licensing fee; no royalties or user-fees for TsLink3 source code or the TsRITE operating system.
TeleSoft International specializes in the development of Intelligent WAN solutions specifically for OEMs. We supply source code for SIP, DSL, PPPoA, PPPoE, ISDN, Q.931, Q.921, QSIG, ML-PPP, PPP, Frame Relay, T1 RBS, E1 CAS, R2 and X.25 Protocol Stacks for license to manufacturers of telecommunications products around the world.
TeleSoft provides 'C' Language Source Code Stacks and Hardware Reference Designs backed up by comprehensive documentation and expert technical support. TeleSoft solutions accelerate time-to-market, minimize technology risk, and decrease the cost of both product development and product
maintenance.
Top
© Copyright
TeleSoft International ·
|
